Ithute AutoCAD sheba

Kajeno ho na le tse 'maloa mahala dithuto AutoCAD Inthaneteng, ka hona ha re ikemiselitse ho etsisa boiteko bo le kopana tse ling, empa ho ena le hoo tlatsana le monehelo o fana ka baka bothata pakeng tsa' nete hore eo e hlalosa hore litaelo tsohle le ntho ea sebele mosebedisi le ba kileng ba tseba ba commandos ha ba tsebe hore na ba qale hokae.

mahala autocad courseLitaba tsena ke likamano tsa livideo tse bonts'a hore na merero ea kaho ea ntlo e entsoe joang, mohato ka mohato. Ke 'nete hore bo thehiloe tabeng version AutoCAD pele 2009 Leha ho le joalo ka mabaka a ho sebelisa mehaho e ntse e tšoanang le maemong a mang ba go tlhofofadiwa bang mehato ka ho tla ha segokanyimmediamentsi sa sebolokigolo 2009 AutoCAD' me a lula ho fihlela AutoCAD 2013.

Ho totobetse hore mehato e meng e hlahisoa ka tsela ena bakeng sa merero ea lithuto empa hore nako e telele basebelisi ba ithuta ho e etsa ka litsela tse ling tse sebetsang. Empa bakeng sa motho ea batlang ho ithuta AutoCAD tloha mengoapo ena e ka ba mahala AutoCAD e le hantle, loketseng bakeng sa ho utloahalang ho bolela hore ho sebetsa ka sefofane hahang.

Ebe ho itlhahisa ka boeona ke fana ka tlhahiso ea AutoCAD 2012 Koetliso ea tataiso e bontšang hore na litaelo tse ncha le sebopeho sa li-ribbon se fetohile joang.

Ho li kenya re nkile tumello e hlokahalang, hobane ke tsa thupelo eo pele e neng e rekisoa ka CD. Le hoja li-video feela li kenyelitsoe, ntle le molumo.

Se latelang se akaretsa seo li-video tsena li se emelang, ho li arola ka mebala, ho bontša hore na li sebelisoa ka lekhetlo la pele:

  • Ka mmala o mosoeu litaelo tsa popo
  • E khubelu litaelo tsa ho hlophisa
  • Lits'ebeletso tse ling tse tala.

Molao ona o ntse o tšoana le oa sehlooho seo ke neng ke se bua ka nako e fetileng: Hore hoa khoneha ho ithuta AutoCAD ka ho tseba feela ho sebetsa ha litaelo tsa 25; le hoja ha u ntse u ntshetsa pele ts'ebetso ena ha ho hlokahale 8 ea Pōpo, 10 ea khatiso, tlhaloso ea boitsebiso le lits'ebeletso tsa 6. Tse qaqileng kahare ho latelang:

image372

Ho hlakile hore sena ke AutoCAD ho qala, lintho tse ling tse ngata li ithutoa hamorao; hape sepheo sa sena ke merero e hahang, sebaka se tla ba le litaelo tse ling, 3D e tla nka ntho e 'ngoe hape. Empa re sebeletsa mohloli bakeng sa ba batlang ho tseba hore na AutoCAD ke eng le hore na ho hlophisetsoa morero ofe o hahang.

Melao ha e kenyelelitsoe lenaneng regen, zoom, pan, save, snap, tse leng tsa tšebelisano-'moho mosebetsing.


1. Pōpo ea lihlopha, marumo le marako

Melao e sebelisitsoeng:

  • lera (1), ho etsa lihlopha: likhahla, marako, menyako, sebaka le lifensetere.
  • Selikalikoe (1), ho etsa mokhoa oa ho atamela sebakeng sa mosebetsi.
  • Line (2), ho latela likhahla tse ka ntle
  • Hlakola, ho latisa likhahla tse ka hare
  • Trim (1), ho fokotsa li-shafts tse feteletseng
  • Qetella (2), ho eketsa marumo
  • Mline (3), ho hula marako

Nako: Metsotso ea 20.

2. Ho bōptjoa likheo ka menyako le lifensetere ka marako.
Melao e sebelisitsoeng:

  • Hlahloba (3): Ho kenya lihlopha tse ngata marako
  • Trim, ho felisa likhetho liphapanyetsong
  • Eketsa (4), ho eketsa mela e meng
  • Fillet (5), ho etsa hore mela e khaole qetellong, ho sebelisoa seea-le-moea = 0
  • Line, ho kenyelletsa lintlha tse ling ka likhareng tsa fensetere
  • Hlakola ho etsa lintlha tse ling ho tloha marako
  • Etsang selikalikoe ho pota-pota lebota la lerako le khabisitsoeng
  • LTS (2), ho bona eka mokhoa oa mela, o o fetola ho 0.01

Nako: Metsotso ea 18

3. Pōpo ea menyako le lifensetere.
Melao e sebelisitsoeng:

  • Mohala, khaola, potoloha le trim, ho hulela lemati.
  • Thibela (4), ho theha sebaka.
  • Hlahloba, ho fetola lebokose ho tloha ho e teng
  • Erase (6)ho hlakola
  • Kenya (5)ho kenya li-blocks tsa mamati likhetlong.
  • Seipone (7)ho theha likopi tse fapaneng tsa mamati.
  • Line, tlohela ho hula lifensetere
  • Tsela (6), ho hulela fensetere leboteng le khabisitsoeng.

Nako: Metsotso ea 21

4. Setšoantšo sa Closet le ho se lekane fatše


Melao e sebelisitsoeng:

  • Layer, ho theha likhaolo: litekanyetso, thepa ea thepa le mobu.
  • Line, ho hula ho se tšoanelehe fatše le ho koala.

Nako: Metsotso ea 6.

5. Setšoantšo sa thepa ea lisebelisoa.
Melao e sebelisitsoeng:

  • Lera, ho etsa lisebelisoa tsa matloana a hloekileng.
  • Line ho hula mohala oa khabinete ea kichineng
  • Setsi sa Boqapi (3), ho kenya li-blocs tsa lavatastos, bateng, ntloana, teba.
  • Tlosa, line, leka ho hula thepa ea ho teba.

Nako: Metsotso ea 8

6. Setšoantšo sa thepa e 'ngoe.

Melao e sebelisitsoeng:

  • Setsi sa Boqapi sa ho kenya setofo, sehatsetsi, kamore ea ho jela.
  • Kopitsa (8) Tsamaea (9), Pheta (10)ho falla le ho fetola likopi tsa liphahlo tsa kamore.
  • Mohala, khaola, potoloha le trim, ho hulela lemati.
  • Setsi sa Boqapi sa ho kenya libethe le koloi.
  • Line, ke ile ka hula fensetere e neng e leketlile moo.

Nako: Metsotso ea 11

7. Ho senya libaka le ho kenya limela

Melao e sebelisitsoeng:

  • Lera ho etsa limela le limela.
  • Hatch (7)ho chesa sekhahla holim'a maru le joang.
  • Setsi sa Mokhoa oa ho kenya limela, lihlahla tsa serapa le letšoao la leboea.
  • ho tsuba ho tlatsa marako a tiileng.

Nako: Metsotso ea 23.

8. Ho kenya litemana tse ngata.
Melao e sebelisitsoeng:

  • Dtext (8) ho hula litemana
  • Mokhoa oa mongolo oa ho ngola mokhoa oa mongolo, o sebelisa Tafole ea thepa (4)
  • Kopitsa, fallela ho kenya litemana tse thehiloeng ho e teng
  • Matlo a Match (5) ho kopitsa matlotlo ho tloha temaneng e 'ngoe ho ea ho e' ngoe.

Nako: Metsotso ea 7

9. Ho khaola.
Melao e sebelisitsoeng:

  • Dimension Style (6), ho theha mokhoa oa ho sebelisa mohlala o fetotsoeng o sebelisang thepa ea thepa.
  • Ho atamela ka mekhoa e sa tšoaneng, e lekanang, e tsoelang pele, ea radial, moetapele.

Nako: Metsotso ea 16

10. Ho hatisoa.
Melao e sebelisitsoeng:

  • Phetolelo (7) tlhophiso ea khatiso ho tswa ho mode

Nako: Metsotso ea 7.

11. Ho hatisa, karolo ea bobeli.
Melao e sebelisitsoeng:

  • Ho hlophisa khatiso ho tswa ho mohaho

Nako: Metsotso ea 6

Ho phaella moo, ka egeomates le kanaleng YouTube, ke tse ling tse tlhaloso livideo tlatsanang taelo ea le para ea khaolo ea selelekela behoe pooaneng e le bareng 25 bopa litaelo le phetolo AutoCAD mmala.

Mona o ka e jarolla dwg file ea sefofane.

Haeba u fumana litaba tsa boitsebiso bona li le molemo, u ka li etsa ngolisa ho akhaonto ea rona ea Youtube, eo re e qalang ka molao ka sehlooho sena.

5 Likarabo ho "Ithute AutoCAD ho shebella"

  1. hlile e le molemo haholo ... esita le molemo ho tloha ha ke bone livideo le shrill molumo o AutoCAD ke nako e ngata ...... le leboha ka tsamaisa hobane re na le batho ba bangata ba ileng ba re ho qapa ithuta sena 'me ha re litsebi empa ...... alla fihla ka thuso ea u ... .queria bolella hore ba se ke ho bona e le bophara le bolelele ka sefofane kapa hore ke khopolo rona ... ..thank ...... .jaime

  2. babatsehang, haholo-holo ba nang le boiphihlelo ba ho honyenyane AutoCAD, bao boholo elemental seo u se re fa, kea leboha ha u dithuto tsena tseo thusa haholo batho ba tšoanang le 'na.

  3. E ntle haholo.

    Ke ne ke batla ho ingolisa ho YouTube ka ho latela sehokela sa "ngolisa" mme ha ke khone ho e etsa, haeba ba na le tsela e 'ngoe, ke tla ba leboha, kaha ke thahasella ho tsoela pele ho ithuta Autocad, ka bobeli ho 2D le 3D.

    Kea leboha

    Motsoalle oa hau: Manuel Libreros

  4. Kea leboha!
    Nka rata hape ho bona tsela ea MicroStation, kaha li thata ho fumana ho feta tsa AutoCAD.
    Tseleng, thupelo e ntle haholo.

Tlohela karabo

aterese ya hao ya imeile ke ke ho phatlalatswa.

Sebaka sena se sebelisa Akismet ho fokotsa spam. Ithute kamoo litlhaloso tsa hau li hlahang kateng.